Our Products

Flow Measurement & Computation

Fox thermal flow meters directly measure mass flow rate in SCFM, NM3H, have no moving parts and can be installed via a single insertion point on a pipe or duct. Fox flow meters provide measurements for natural gas flow, air flow and other gases (NH3, Ar, Butane, Propane, Biogas, Cl2, CO2, Ethane, He, H, N, O2,  CH3, Flare gas, Mixed gases, Flash Gas, Digester Gas, Vent Gas)  . Fox Instruments Products are  approved  for  Class  I, Division 1, Groups B, C, and D hazardous areas.
Please visit www.foxthermalinstruments.com for more information.


McCrometer's flow meters are used in many liquid, gas and steam fluid processes in challenging industries: chemical, electric power, and oil  /  gas,  as  well  as  municipal  water  and  municipal  waste  water.   McCrometer's advanced flow solutions, the patented V-Cone® Flow Meter and highly accurate, self- conditioning Wafer-Cone®, perform reliably in the harshest environments. The V-Cone and Wafer  Cone  solve tough flow instrumentation challenges in sub-sea platforms, offshore platforms, on land and in wet or dirty gas environments. The V2 System is especially useful when irregular or crowded piping and equipment make magnetic, turbine or venturi tube meters impractical or unworkable.
Please visit www.mccrometer.com for more information.

KRAL Flowmeters are tailor-made solutions for measuring  non-abrasive,  non-agressive,  lubricating  fluids.  .  KRAL  Flowmeters provide both sturdy design and high sprecision. They are robust, precise, have multiple port connections and are used in wide range of applications.  
Please visit www.kral.at for more information.


Among other products RITTER manufactures Gas Flow Meters which are unique world-wide.  These Meters can be used for measuring the volume of highly aggressive flowing gases with laboratory precision (Drum type Meters); volume of flowing inert and dry gases at high gas flows (Bellow Type Gas Meters); measurement of small amounts of gas- inert and slightly aggressive gases with ultra-low flow rates (MilliGas Counters); easy and reliable collection of air & gas samples (Gas Sampling Bags) . Ritter Gas Meters are used extensively in: Oil & Gas, Petrochemical, Steel, Environmental Industries.
Please visit www.ritter.de for more information.


KEM-Kueppers is synonymous with a foremost international supplier of flowmeters, flow evaluation equipment and expert solutions to any flow measurement application. Specializing in the field of flow metering technology and calibration KEM supply high quality flowmeters and solutions to your flow measurement tasks to all branches of international industry.

  • Mass Flow Meter (For fluids of all kinds, e.g. paints and PU-components. Measuring ranges from 4.5 kg/h up to 60,000 kg/h and pressures up to 350 bar)
  • Coriolis mass flow meters
  • TRICOR Mass
  • Gear Flow meter (PD meters which are used in various applications e.g. for paints, underbody seal, sealants, fuel consumption control devices, polyol, coating and cavity wax, glue, PVC, abrasive fluids, hydraulic oil).
  • Turbine Flow Meter (fuels, light fuel oil, thermal oil, solvents, tap and demineralised water,  refrigerants, pharmaceutical fluids, liquefied gases, cryogenic fluids and high pressure applications).
  • Helical Flow Meter (Helical flow meters are PD meters suited for the flow measurement of very high viscosity fluids e.g epoxy resigns, PVC and underbody sealants, anti-flutter materials, adhesives, polyurethane, polymers, sealants, petrochemicals and thixotropical fluids, grease, oil, glues, heavy fuel oil)
  • Microflowmeter (PD Flow meter for low-viscosity fluids,  and It facilitates the measurement of extremely low flow rates from 5 cs/min upwards. E.g. for additives, pharmaceuticals, aromatic substances/perfumes, liquefied gases,
    demineralised water, fluid food).
  • Turbidity Meter (Used in numerous applications in the food industry e.g.in the processing of milk, ice cream, yogurt, juice, soft drinks, beer or water and also for pharmaceutical and chemical fluids as well as sludge/waste water, pulp and paper. Product monitoring, CIP monitoring, Phase break, Detect filter breaks Monitor waste streams)

Please visit http://www.kem-kueppers.com  for more information.

A supplier of flow measurement instrumentation, Smart Measurement / Alia Inc. offers a wide range of flow metering equipments such as:

  • Electromagnetic flowmeter
  • Magnetic (Inline & Insertion)
  • Postitive Displacement (Nutating Disc, Oscillating Piston, Oval, Root)
  • Metal tube variable flowmeter
  • Corolis Flowmeter
  • Ultrasonic flowmeter
  • Vortex flowmeter
  • Target (Inline & Insertion)
  • Thermal (Inline & Insertion)
  • Variable Area
  • Flow computer
  • Paperless recorder
  • Smart Differential Pressure Transmitter.
  • Flow Switch (Thermal & Variable Area)

 Please visit http://smartmeasurement.com and www.alia-inc.com   for more information.

TECFLUID is a spannish manufacturer of flow measurement products like:

  • Ariable Area Flowmeter (Plastic Tube, Metal Tube and Glass tube)
  • Electromagnetic Flowmeter (Inline and Insertion)
  • Target Meter
  • Orifice Plate
  • Ultrasonic Flowmeter

Please visit http://tecfluid.com    for more information.


Arad specialises in the design, development and manufacture of top quality precision water meters for applications such as domestic, waterworks, irrigation and water management throughout the world.

  • High standard Multi Jet, Volumetric and Single Jet water meters for domestic applications.
  • Magnetic and Positive Displacement Water Meter
  • Water Meter with electrical output
  • Bulk water meters designed for use in waterworks networks and industrial applications
  • Ultrasonic Bulk Water Meter
  • Woltman Water Meter
  • Fire Service Water Meter
  • Irrigation and Agriculture Water Meter
  • Water Meters with Electrical Output
  • Wide range of solutions for agriculture applications:
  • Water meters
  • Hydrometers
  •  Automatic metering valves
  • Fertilizer and chemical solutions meters

Please visit http://arad.co.il   for more information.

FAFNIR Sensors & Systems GMbH is a specialist in the development and manufacture of sensors and systems for monitoring & measuring fill levels to the oil & gas, chemical, pharmaceutical, water/waste water  and food industries. FAFNIR Sensors are typically made from high quality stainless steel, so are suitable for use in a wide variety of petroleum spirits, petrochemicals and food products.

  • Fafnir Petrol Station Technology


  • Overfill Prevention Sensors - The filling sensor is a safety mechanism to prevent overfilling of storage and bunker tanks when they are filled with gasoline, diesel and fuel oil from road tankers. It consists of a level sensor inside the tank and an amplifier with valve inside the road tanker.

  • VISY-X Tank Level Gauging and Environmental Sensors- The VISY-X system supplies information on tank levels. As an electronic dip system it serves for the protection of people and the environment. VISY-X has been especially designed for application in petrol stations. Each VISY-X system consists of 1 to 16 sensors VISY-Stick and a conversion system VISY-Command.


  • SMS-Box (Universal Message Device) - The SMS-Box for universal use sends alarm and status messages from all FAFNIR systems and equipment from other manufacturers as text message, fax or e-mail. The SMS box is the ideal reporting device for a broad range of applications. Typical applications include unmanned filling stations or operations, remote warehouses or containers as well as other technical facilities.
  • FAFNIR Process Technology


  • CONDURIX (Potentiometric Level Sensor ) - The CONDURIX sensor provides information about the fill levels of tanks. It has been designed for use in all electrically conducting liquids ≥ 1 µS cm. CONDURIX functions as continuous level measurement or separation layer measurement to assure quality and security in the process.

  • DIVELIX (Hydrostatic Level Sensor) - DIVELIX can continuously measure the levels of fluids in storage tanks
    and containers. It is used wherever other sensors are too large or cannot be installed because of tank fixtures.
    DIVELIX is especially suitable for use in oils and oily liquids, brake fluid, glycerin and glycol.

  • TORRIX (Magnetostrictive Level Sensor) - TORRIX provides information about levels in containers. It functions as continuous level measurement to assure quality and security in the process. TORRIX is suitable for use in all liquid medium in which a highly precise level measurement is required.

  • UM-X (Field Display) - The indicator UM-X in a field housing. UM-X can be used anywhere a comfortable stand-alone level display is required.

  • THE COOL ONE (Caliometric Level Sensor) - The level sensor THE COOL ONE can monitor limits of liquids in tanks, containers, canals and pipes. THE COOL ONE can be used wherever float switches and vibration switches were previously used as well as in places where these devices could not be installed owing to a lack of space. THE COOL ONE is especially suitable for use in medium whose viscosity decreases as the temperature rises. It is practically predestined for oily liquids and fats. However,
    it is also used in corrosive media.

Please visit http://fafnir.com    for more information.


(Processing Representation)
ROMET as an international market leader in the supply of precision positive displacement rotary gas meters, electronic volume instrumentation and auxiliary equipment for the natural gas industry.  ROMET offers a variety of measuring instruments to meet the diverse requirements posed by the natural gas industry.

  • Mechanical Rotary Meters
  • Electronic Rotary Meter
  • Electronic Volume Correctors
  • Auxiliary Products (Internal & External Pulser, battery packs, maintenance kit, screen tee filters, adapter plates and kits, tach-adapter, romet oil e.t.c.)

Please visit : http://www.rometlimited.com for more info.

Back to Product Page